At the Chen Lab, I learned to grow 3D microvascular networks: dense, branching capillary beds that form on their own when blood vessel cells and supporting cells are cast together in a gel. Getting these networks right takes more than following a protocol. Cell density, gel composition, growth factors, and chip design all have to work together, and small changes can decide whether the vessels open up or collapse. I can now make these networks reliably, with open vessels that span the whole chip and connect to channels on either side so fluid can flow through them.
Left: a vessel network spanning the whole chip. Right: fluorescent beads flowing through the vessels, showing the network is open and connected from end to end.
I also combined these engineered networks with living mouse tissue. When I placed a piece of mouse fat tissue next to an engineered network, red blood cells from the tissue flowed into the engineered vessels. This suggests the tissue's own vessels connected with the ones I grew, a step toward joining lab-grown vessels to real tissue.
Red blood cells from mouse fat tissue flowing through engineered vessels.
I also developed a way to make microfluidic chips from double-sided tape. Most chips in the field are made from PDMS using soft lithography, which works well but is slow, messy, and needs molds made in a cleanroom. It's also hard to build chips with many stacked layers. So I switched to tape. I cut each layer of tape and plastic film on a desktop cutting plotter, then stack them like a sandwich to build the chip. There's no mold to make and no curing time. A new design can go from idea to working chip in [a day], and changing a layer is as easy as cutting a new one. Stacking layers also makes it simple to build 3D architectures that are hard to make with PDMS. This is the method behind the blood and lymphatic chip.